Company Details

  • FORZATEC CO., LIMITED

  •  [Jiangsu,China]
  • Business Type:Manufacturer
  • Main Mark: Africa , Asia , Europe , Middle East , North Europe , West Europe
  • Exporter:81% - 90%
  • Certs:CE, RoHS, TUV
  • Description:12V50Ah LiFePO4 Lithium Ion Accumulator,12V50Ah LFP Lithium Fe Battery,12V50Ah Lithium Ferro Phosphate Battery
Inquiry Basket ( 0 )

FORZATEC CO., LIMITED

12V50Ah LiFePO4 Lithium Ion Accumulator,12V50Ah LFP Lithium Fe Battery,12V50Ah Lithium Ferro Phosphate Battery

Home > Products > Lithium Battery Pack > 12V LiFePO4 Lithium Battery > 12V50Ah LiFePO4 Lithium-ion Battery

12V50Ah LiFePO4 Lithium-ion Battery

Share to:  
    Min. Order: 100 Pack/Packs
    Delivery Time: 20 Days

Basic Info

Model No.: 12V50Ah LiFePO4

Type: Lithium-Ion Battery Pack

Connection Mode: Series and Parallel

Rechargeable: Chargeable

Discharge Rate: Medium Discharge Rate

Size: Medium, 105X156X410mm

Accessories Type: Battery

Rated Capacity: >1000MAH

Standard Voltage: >12V

Additional Info

Packaging: paper carton + pallet

Productivity: 10,000 packs per month

Brand: FORZATEC

Transportation: Ocean,Land,Air

Place of Origin: Jiangsu

Supply Ability: 10,000 packs per month

Certificate: CE ROHS

HS Code: 8507600090

Port: Shanghai,Shenzhen,Yiwu

Product Description

12.8V50Ah LiFePO4 (lithium Ferric phosphate) battery pack works stably as a mini EES for solar applications and power source for E-motors of small power. Because of the nominal 3.2V output, four cells are placed in series for a nominal voltage of 12.8 V, which comes close to the nominal voltage of six-cell 2V gel battery. Along with the good safety features of ferrous phosphate batteries, this makes LFP a good potential replacement for lead-acid batteries in many applications such as E-vehicle and solar applications. We adapt corresponding LFP charging system to protect the LFP cells from excessive charging voltages and mantain CC/CV-mode charging, temperature-based voltage compensation, continuous trickle charging, and equalisation among different cells. The LFP cells are sorted by sophisticated procedures before the packs are assembled and a battery management system also have been implemented to ensure no damage to occur in daily cycling.



Environmental Function

Items

Test Methods

Acceptance criteria

4.1

Temperature cycling

Fully charged batteries are subjected to temperature cycling (- 20℃~+75℃) in forced draught chambers, according to the following procedure.Step 1: Place the batteries in an ambient temperature of 75℃ ± 2℃ for 4 h.Step 2: Change the ambient temperature to 20℃ ± 5℃ with in 30 min and maintain at this temperature for a minimum of 2 h.Step 3: Change the ambient temperature to - 20℃± 2℃ within 30 min and maintain at this temperature for 4 h.Step 4: Change the ambient temperature to 20℃± 5℃ within 30 min and maintain at this temperature for a minimum of 2 h.Step 5: Repeat steps 1 to 4 for a further four cycles.After the fifth cycle, store the batteries for seven days prior to examination.

no fire, no explosion, no leakage

4.2

Vibration

Fully charged batteries are vibration-tested under the following test conditions.

Simple harmonic motion is applied to the batteries with amplitude of 0.76mm, and a total maximum excursion of 1.52mm. The frequency is varied at the rate of 1 Hz/min between the limits of 10 Hz and 55 Hz. The entire range of frequencies (10 Hz to 55 Hz) and return (55 Hz to 10 Hz) is traversed in 90 min ± 5 min for each mounting position (direction of vibration). The vibration is applied in each of three mutually perpendicular directions, in the sequence specified below.

Step 1: Verify that the measured voltage is typical of the charged product being tested.

Steps 2-4: Apply the vibration as specified in Table.

Step 5: Rest battery for 1 h. then make a visual inspection.

no fire, no explosion, no leakage

4.3

Low pressure

Each fully charged is placed in a vacuum chamber in an ambient temperature of 20 ± 5 . Once the chamber has been sealed, its internal pressure is gradually reduced to a pressure equal to or less than 11.6 kPa held at that value for 6 h.

no fire,

no explosion

no leakage



cell safety tests

5.1

External short circuit

Fully charged batteries are stored in an ambient temperature of 20℃±5℃,battery is then short-circuited by connecting the positive and negative terminals with a total external resistance of less than 5mΩ. The batteries remain on test for 10Min.

no fire,no explosion

5.2Free fall

Each fully charged battery is dropped three times from a height of 1.0 m onto a concrete floor. The batteries are dropped so as to obtain impacts in random orientations.

no fire,no explosion

5.3

Mechanical shock

The fully charged battery is secured to the testing machine by means of a rigid mount which will support all mounting surfaces of the battery. The battery is subjected to a total of three shocks of equal magnitude. The shocks are applied in each of three mutually perpendicular directions. At least one of them shall be perpendicular to a flat face.

For each shock the battery is accelerated in such a manner that during the initial milliseconds the minimum average acceleration is 75 gn. The peak acceleration shall be between 125 gn and 175 gn. Batteries are tested in an ambient temperature of 20 °C ± 5 °C.

no fire,no explosion

5.4

Thermal abuse

Each fully charged cell, stabilized at room temperature is placed in a gravity or circulating air-convection oven. The oven temperature is raised at a rate of 5 °C/min ± 2 ℃/min to a temperature of 130℃ ± 2℃. The cell remains at this temperature for 10 min before the test is discontinued.

no fire,no explosion

5.5

Crushing of cells

Put the fully charged single cell in the condition of 20℃±5℃.

Extrusion direction: Pressure on the direction of perpendicular to the battery plate

Extrusion size: not less than 20 c;

Extrusion Level: until the battery case rupture or the internal circuit (battery voltage is 0V)

no fire,no explosion

5.6

Overcharge

The cell is discharged with 0.5 C to the end-of-discharge voltage, then charged from a power supply of 5 V, at the charging current 0.2 C for 12,5 h.

no fire,no explosion

5.7

Forced discharge

20℃±5℃,0.5C discharge.( (If has electronic protection circuits, the electronic discharge protection circuit should be temporarily removed), tests ends until a single battery voltage reaches 0V.

no fire,no explosion

5.8

Prong it by direction of perpendicular to the battery, with φ3mm-φ8mm high thermal resistant needle by the speed of 10mm/s-40mm/s.(the steel needle stay on the battery)

no fire,no explosion


12V50AH LiFePO4 battery

Looking for ideal 12V50Ah LiFePO4 Lithium Ion Accumulator Manufacturer & supplier ? We have a wide selection at great prices to help you get creative. All the 12V50Ah LFP Lithium Fe Battery are quality guaranteed. We are China Origin Factory of 12V50Ah Lithium Ferro Phosphate Battery. If you have any question, please feel free to contact us.

Product Categories : Lithium Battery Pack > 12V LiFePO4 Lithium Battery

Product Images
  • 12V50Ah LiFePO4 Lithium-ion Battery
  • 12V50Ah LiFePO4 Lithium-ion Battery
  • 12V50Ah LiFePO4 Lithium-ion Battery
  • 12V50Ah LiFePO4 Lithium-ion Battery
  • 12V50Ah LiFePO4 Lithium-ion Battery
Email to this supplier
  • *Subject:
  • *Messages:
    Your message must be between 20-8000 characters
Communicate with Supplier?Supplier
Steve Stone Mr. Steve Stone
What can I do for you?
Chat Now Contact Supplier